SCHAFFER LOADERS
In many agricultural enterprises our loaders become “part of the family”. They are indispensible machines used all day long with many applications thanks to a large choice of tools. They make many tasks much easier and contribute to the increased efficiency of the business.
Below is just a selection of the machines available. Please contact us for more information about the complete range.
6680 T
TELESCOPIC WHEEL LOADERS
Safely work at high lifting heights in uneven terrain or confined spaces. Schäffer telescopic wheel loaders are amongst the most successful of their class. The vehicles boast essential characteristics that make them unique, such as the rear swing axle or the or the wear- and maintenance-free Ferro-Form sliding elements.
- Diesel engine 4 cyl. Deutz Common Rail Turbo with Intercooler, Tier 4 final
- Output 75 / 90 / 100 kW (102 / 122 / 136 HP)***
- Working weight cabin 7050 kg – 7950 kg
- Length with standard bucket 6031 mm
- Width 2030 mm – 2180 mm
- Height 2770 mm / 2670 mm**
- Turning radius 2240 mm
- Lifting capacity 4200 kg
- Tipping load straight, pallet fork* 4640 kg
- Lifting height (tool pivot) 5200 mm
- *according to ISO 14397 (boom horizontal)
- **Option: low cabin
- ***Option: powerfuller engine
- Deutz Turbo Intercooler diesel engine, 4 cylinders, water-cooled, 75 kW (102 HP) / 90 kW (122 HP) / 100 kW (136 HP), Tier 4 final
- DOC and SCR for compliance with Stage IV final emissions standards
- Hydrostatic four wheel drive with automotive control
- Tyres 18-22.5 MP590, offset -50
- HTF (High Traction Force)
- SPT (Schäffer Power Transmission)
- Hydraulic quick gear 20 km/h switchable under load
- Flow sharing working hydraulics, 105 l/min., proportional control of the telescopic arm
- Planetary axles HD with limited slip differentials
- Rear pendulum axle
- Ferro-form sliding elements in the telescopic arm
- Tool cylinder in the telescopic arm
- Electric pressure relief of hydraulic couplings
- Combined oil cooler
- Hydraulic fan drive
- SCV-Plus-Cabin (Silence, Comfort, View)
- Multiple disk brake, maintenance free; service and parking brake
- Maintenance free articulation joint
- 2 steering cylinders
- 2 x working headlights front und 1 x rear
- Lighting system without ABE (General approval certificate) according to ordinance StVZO
- Z-bar boom with parallel lift
- Additional control device electrically switchable on joystick
- Depressurised return
- Steering column adjustable in length and angle
- Operating hours meter, rev counter, fuel and temperature gauge, engine monitoring
- Adjustable armrest
- Rear weight end plate and towing hitch
- Main battery switch
- Cyclone
- Headstock type wheel loader with hydraulic tool lock
8620 T
TELESCOPIC WHEEL LOADERS
Safely work at high lifting heights in uneven terrain or confined spaces. Schäffer telescopic wheel loaders are amongst the most successful of their class. The vehicles boast essential characteristics that make them unique, such as the rear swing axle or the telescopic arm to accommodate and protect the tool cylinder
- Diesel engine 4 cyl. Deutz Common Rail Turbo with Intercooler, Tier 4 final
- Output 75 / 90 / 100 kW (102 / 122 / 136 HP)***
- Working weight cabin 7050 kg – 7950 kg
- Length with standard bucket 6031 mm
- Width 2030 mm – 2180 mm
- Height 2770 mm / 2670 mm**
- Turning radius 2240 mm
- Lifting capacity 4200 kg
- Tipping load straight, pallet fork* 4640 kg
- Lifting height (tool pivot) 5200 mm
*according to ISO 14397 (boom horizontal)
**Option: low cabin
***Option: powerfuller engine
- 4-cylinder diesel engine Deutz TCD 3.6, 75 kW (102 HP) / 90 kW (122 HP) / 100 kW (136 HP)
- DOC and SCR for compliance with Stage IV final emissions standards
- Hydrostatic four wheel drive with automotive control
- High-pressure drive HD-plus
- Tyres 18-22.5 MP590, offset -50
- HTF (High Traction Force)
- SPT (Schäffer Power Transmission)
- Hydraulic quick gear 20 km/h switchable under load
- Flow sharing working hydraulics, 105 l/min., proportional control of the telescopic arm
- Planetary axles HD with limited slip differentials; (8-hole)
- Rear pendulum axle
- Ferro-form sliding elements in the telescopic arm
- Tool cylinder in the telescopic arm
- Electric pressure relief of hydraulic couplings
- Combined oil cooler
- Hydraulic fan drive
- SCV-Plus-Cabin (Silence, Comfort, View)
- Multiple disk brake, maintenance free; service and parking brake
- Maintenance free articulation joint
- 2 steering cylinders
- LED working headlights: 2 x front, 1 x rear
- Lighting system without ABE (General approval certificate) according to ordinance StVZO
- Z-bar boom with parallel lift
- Additional control device electrically switchable on joystick
- Depressurised return
- Steering column adjustable in length and angle
- Operating hours meter, rev counter, fuel and temperature gauge, engine monitoring
- Adjustable armrest
- Rear weight end plate and towing hitch
- Main battery switch
- 2-stage air cleaner with highly efficient pre cleaner system
- Driver-on-board switch
- Headstock type wheel loader with hydraulic tool lock
9640 T
TELESCOPIC WHEEL LOADERS
Safely work at high lifting heights in uneven terrain or confined spaces. Schäffer telescopic wheel loaders are amongst the most successful of their class. The vehicles boast essential characteristics that make them unique, such as the rear swing axle or the or the wear- and maintenance-free Ferro-Form sliding elements.
- Diesel engine 4 cyl. Deutz Common Rail Turbo with Intercooler, Tier 4 final
- Output 100 kW (136 PS)
- Working weight cabin 8400 kg – 9700 kg
- Length with standard bucket 6260 mm
- Width 2330 mm – 2380 mm
- Height cabin 2860 mm/2760 mm**
- Turning radius inside 2280 mm
- Lifting capacity 4200 kg
- Tipping load straight, pallet fork* 5350 kg
- Lifting height (tool pivot) 5400 mm
- Tipping height (bottom edge of bucket) 4574 mm
- *according to ISO 14397 (boom horizontal)
- ** Option: low cabin
- Deutz Turbo Intercooler diesel engine, 4 cylinders, water-cooled, 100 kW (136 HP), Tier 4 final
- DOC and SCR for compliance with Stage IV final emissions standards
- Hydrostatic four wheel drive with automotive control
- Tyres 460/70R24 AS, offset -50
- HTF (High Traction Force)
- Hydraulic quick gear 20 km/h switchable under load
- Load-Sensing working hydraulics, 145 l/min.
- Flow sharing working hydraulics incl. proportional control of the telescopic arm
- ZF planetary axles (Heavy Duty) with self-locking differentials
- Rear pendulum axle
- Ferro-form sliding elements in the telescopic arm
- Tool cylinder in the telescopic arm
- Electric pressure relief of hydraulic couplings
- Combined oil cooler
- Hydraulic fan drive
- SCV-Plus-Cabin (Silence, Comfort, View)
- Multiple disk brake, maintenance free; service and parking brake
- Maintenance free articulation joint
- 2 steering cylinders
- 2 x working headlights front und 1 x rear
- Lighting system without ABE (General approval certificate) according to ordinance StVZO
- Z-bar boom with parallel lift
- Additional control device electrically switchable on joystick
- Depressurised return
- Steering column adjustable in length and angle
- Operating hours meter, rev counter, fuel and temperature gauge, engine monitoring
- Adjustable armrest
- Rear weight end plate and towing hitch
- Main battery switch
- Cyclone
- Headstock type wheel loader with hydraulic tool lock